Microirrigation
Dripline with Integral Drippers
Drippers are integrated during the production process according to UNE 68.076, with high resistance to obstruction, long life and high flow uniformity. The filtration grade recommended is ≤130 micron with a maximum pressure of 2,5 km/cm2.
Number of standard drill holes: 2
Dripline with Integral Pressure-Compensating Drippers
Drippers are integrated during the production process according to UNE 68.076, but in contrast to the normal integral drippers, they keep the nominal flow in a wide pressure interval, so that they can work in a great range of pressure levels, reaching a long span of length. They have high resistance to obstruction due to the filter incorporated at the inlet. Thanks to these drippers saving of water and control of fertilizers consumption is obtained.
The filtration grade recommended is ≤130 micron with a maximum pressure of 2,5 km/cm2.
Number of standard drill holes: 2
 Dripline with Inserted Drippers
Drippers are inserted after the dripline production process and manufactured according to UNE 53.367. They are ideal for applications with low quality waters, due to their high resistance to obstruction.
The filtration grade recommended is ≤130 micron with a maximum pressure of 2,5 km/cm2.
 Dripline with removable drippers S-50 / S-25
Drippers to be inserted after the dripline production process. They are ideal for low quality waters, because they are very resistant to obstruction. Fabrication according to UNE 53.367
The filtration grade recommended is ≤130 micron with a maximum pressure of 2,5 km/cm2.
On-Line Pressure-Compensating Drippers (CYSNE)
On-Line pressure-compensating (PC) and non-leakage (PCND) drippers keep the nominal flow in a wide pressure interval, reaching high levels of uniformity and homogeneity and long span of length.
It can be installed on microirrigation pipes as well as in direct applications.
Se pueden instalar sobre tubería de microirrigación y también en aplicación directa.
Tested according to UNE 68.075
The filtration grade recommended is ≤130 micron with a maximum pressure of 2,5 kg/cm2.
 Dripline with Flat Drippers
Dripline with flat drippers integrated during the production process according to ISO 9261 and designed with a new winding system to save storage space and facilitate the transport.
The offer great hydrodynamic efficiency and reliability.
The filtration grade recommended is ≤130 micron with a maximum pressure of 2,5 km/cm2.
Number of standar drill holes: 1
 Dripline with Pressure-Compensating Flat Drippers
Dripline with falt drippers integrated during the production process according to ISO 9261 and designed with a new winding system to save storage space and facilitate the transport. They keep the nominal flow in a wide pressure interval, reaching high levels of uniformity and homogeneity and long span of length.
The filtration grade recommended is ≤130 micron with a maximum pressure of 3,0 km/cm2.
Number of standard drill holes: 1
 Subsurface Irrigation
Thanks to subsurface drip irrigation, we are able to reduce the water evoparation which usually takes place in the superficial irrigation, obtaining a better distribution and use of water and fertilizers. At the same time, we avoid the appearance of weeds and we save manpower and maintenance.
Subsurface irrigation can be used in farming applications with longer life of the system.
|
